2
Before you begin reading, confirm the model of your appliance.
These instructions cover the following models:
LTR-3- 85 LTR-3-120
LTR-3-85 E LTR-3-120 E
LTR-3-85 EP LTR-3-120 EP
____________________________________________________________
LTR-3-85 Fan efficiency 130 W
LTR-3-120 Fan efficiency 185 W
E Electrical heating coil 500 W (built-in), with thermostat.
EP Electrical heating coil 500 W (built-in), with Pulser regulator (cabling
required) and TG-K330 temperature sensor (cabling also required, see the
circuit diagrams at the end of the instruction).
E09KP-016 Electrical heating coil 900 W for installation in duct with Pulser regulator
(cabling required) and TG-K330 temperature sensor (cabling also required,
see the circuit diagrams at the end of the instruction).
E18KP-016 Electrical heating coil 1800 W for installation in duct with Pulser regulator
(cabling required) and TG-K330 temperature sensor (cabling also required,
see the circuit diagrams at the end of the instruction).
On all models the ducting connections are Ø 160 mm.
MODEL
EXPLANATION OF THE MARKS AND NUMBERS
To Next Page
Loading...
