ENFORCER E-920A - User Manual

Page 1
When triggered by an alarm system, the
E-920A Voice Dialer can dial up to four
telephone numbers and/or pager
numbers. Each number can contain up
to 32 digits (including "pound" tones and
"pauses" used in pager numbers).
When the dialer is activated, the LCD will
show the numbers dialed at each step of
the dialing process. When the dialer
makes a connection, one of two possible
16-second voice messages, which the
user can record to respond to one or two
trigger inputs, will be delivered twice to
ensure the full message is received. This
process will repeat for each number
stored. If within 8 to 10 rings there is no
connection, the E-920A will automatically
dial the next programmed number.
As soon as the dialer has attempted to
dial each number one time, if the unit is
still in the alarm state, the dialer will
attempt to call the previous unanswered
or busy numbers up to 8 more times,
rotating through all unanswered
numbers until the full message was
delivered to each number two times.
Note: If the number of a voice pager
service which requires operator
assistance is used, the service should
be notified in advance regarding the
meaning of the message.
HOW IT WORKS
Summary: The E-920A Voice Dialer will automatically dial up to four
telephone numbers and deliver one of two different messages when
triggered by an alarm system.
SECO-LARMSECO-LARM
SECO-LARMSECO-LARM
SECO-LARM
®
U.S.A., Inc. U.S.A., Inc.
U.S.A., Inc. U.S.A., Inc.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Website: www.seco-larm.com
E-mail: sales
@ seco-larm.com
miE920A2004b_pdfb.pmd
WARRANTY: The ENFORCER 920A Voice Dialer is warranted against defects in
material and workmanship while used in normal service for a period of one (1) year from the
date of sale to the original customer. Our obligation is limited to the repair or
replacement of
any defective part if the unit is returned, transportation pre-paid, to SECO-LARM.
PIKVR1
Installation Manual
ENFORCER
®
E-920A
Voice Dialer

Summary

How It Works

E-920 A Voice Dialer Operation

Details how the E-920A dials numbers, delivers messages, and handles retries.

Warranty

Controls and Connections

Wiring Diagram

Connecting the E-920 A

Setting the DIP Switches

Delay and System Settings

Configures exit/entrance delays, dial-out type, and telephone system compatibility.

Trigger Input and Unused Settings

Manages trigger input timing, trigger input #1/#2 function, and the unused switch.

Storing Telephone Numbers

Programming Telephone Numbers

Step-by-step guide to enter and program telephone numbers for automatic dialing.

Memory Location Storage

Explains how to store numbers in specific memory locations and provides examples.

Erasing Stored Memory

Storing Pager Numbers and Messages

Recording Voice Messages

Voice Message Recording Process

Details the steps for recording, timing, and storing custom voice messages via the microphone.

Specifications

Self-Test Procedure

Testing Dialing Operation

ENFORCER E-920A Specifications

General

Brand	ENFORCER
Model	E-920A
Category	Intercom System
Language	English