ENGLISH 5
DECLARATION OF INCORPORATION
This declaration covers the control system Microprop DC2 track control
Microprop AB hereby declares that the control system complies with
directive: 2006/42/EC, Annex 1; clause 1 and 3 and that the technical
documentation is compiled in accordance with Annex 7 (B) of the directive.
Microprop AB undertakes to transmit, in response to a reasoned request by
the appropriate national authorities, relevant information on the machine
identified above.
The control system is incomplete and must not be put into service until the
machinery into which it is to be incorporated has been declared in conformity
with the provisions of the directive 2006/42/EG.
We declare that the control system as above complies with directive:
2004/108/EG and 2006/42/EG.
Harmonising standards Note
SS-EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control
systems - Part 1: General principles for design
SS-EN ISO 12100:2010 Safety of machinery - General principles for design -
Risk assessment and risk reduction
SS-EN 474-1:2006+A1:2009 Earth-moving machinery - Safety - Part 1: General
SS-EN 474-5:2006+A1:2009 Earth-moving machinery - Safety - Part 5:
Requirements for hydraulic excavators
SS-EN 60204-1:2006 Safety of machinery - Electrical equipment of
machines - Part 1: General requirements
SS-ISO 15998:2008 Earth-moving machinery - Machine-control systems
(MCS) using electronic components - Performance
criteria and tests for functional safety
SS-EN 13309:2010 Construction machinery - Electromagnetic
compatibility of machines with internal power supply
Responsible for compiling the technical documentation
Roberth Jonsson, product manager Microprop DC2
Bertil Hammarström, CEO
2011-12-31 Umeå
Microprop AB
Industrivägen 8
901 30 Umeå
To Next Page
Loading...
Need help?
General