SAFETY REGULATIONS
ENGLISH 7
1. SAFETY REGULATIONS
1.1. GENERAL
It is of outmost importance that you have read and understood all warnings before
assembling and using the tiltrotator/rotator and supplied equipment. The warnings
focus on potential risks and how these are avoided. If uncertain – contact your
employer or supplier.
Remember – with a good judgment and great knowledge of the machine many
risks are sufficiently reduced. The user should therefore make time to learn how to
use Microprop DC2 and the other equipment in a safe way before the machine is
put into service.
1.2. CHECKLIST SAFETY
WARNING!
Broken or damaged equipment can cause injury or damage on persons,
environment or property. Ensure that service and maintenance is made according
to recommendation.
WARNING!
Never attempt to increase the equipment’s maximum capacity by modifications not
approved by the supplier.
WARNING!
Exchange damaged and/or unreadable labels and warning signs before the
machine is put into use.
WARNING!
Maintenance and reparation of the electrical system may only be made by
educated personnel.
To Next Page
Loading...
Need help?
General