ENGWE L20SE - System Customization

14
setting options, and press the button to enter the parameter modification
interface;
(3) Press the button / for parameter selection;
(4) Press the button to save the parameter and return to the selection
interface of general setting options;
(5) Press and hold the button to save the parameter and exit the selection
interface of general setting options.
The following selection interfaces of general setting options are available:
6.1 Trip distance reset
tC refers to the trip distance reset item. tC-n means not to reset the trip
distance, and tC-y means to reset the trip distance.
Press the button to enter the parameter modification interface. Press the
button / for parameter selection. Press the button to save the
parameter and return to the selection interface of general setting options.
6.2 Backlight luminance setting
bL refers to the backlight luminance setting option. Parameters bL-1, bL-2 and
bL-3 are available, which represent the backlight luminance, 1 for the
minimum luminance, 2 for the standard luminance and 3 for the maximum
luminance.
Press the button to enter the parameter modification interface. Press the
button / for parameter selection. Press the button to save the
parameter and return to the selection interface of general setting options.
6.3 Metric/imperial system setting
Un refers to the metric/imperial system setting option. U-1 represents the