Need help?Do you have a question about the ENGWE L20 and is the answer not in the manual?
Install the handlebar using a 4mm hexagon wrench, adjust angle, and tighten bolts with proper force.
Attach the front wheel to the fork, ensuring correct orientation, and secure with a 15mm wrench.
Install the right pedal clockwise and the left pedal counterclockwise using a 15mm wrench.
How to adjust the motor output power by selecting assist levels 1-5 using the plus/minus buttons.
Information on error codes displayed for system faults and the need for troubleshooting.
General| Category | Electric Bicycle |
|---|---|
| Frame Material | Aluminum Alloy |
| Tire Size | 20 x 4.0 inches |
| Weight | 34 kg |
| Brakes | Hydraulic Disc Brakes |
| Suspension | Front suspension fork |
| Display | LCD Display |
| Foldable | Yes |
| Load Capacity | 150 kg |
| Gears | 7-speed |
| Lights | Front and Rear Lights |
| Motor | 750W Brushless Geared Hub Motor |
| Battery | 48V 13Ah |
To Next Page
