EasyManua.ls Logo

ENGWE L20 - Charging

ENGWE L20
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
7.Charging
You can charge the bike directly, or you can remove the
battery for charging.
The RED light indicates it is in charging and GREEN light
indicates the battery is fully charged. (Please put off plug from
wall)Usually the charging time is 4-6 hours depends on the
battery capacity remain.
WARNING:
Charging time over 10 hours is prohibited, please kept it away
from high temperature environment and stores it in a cool place.
Please make sure that the battery charger and charging plug
are always kept dray and never get wet.
The charger should only be cleaned with a dry cloth. Never
use a wet cloth, oil or any other liquid.
Do not connect positive and negative terminals.
Stop the charging procedure immediately if you notice
anything unusual.
It is strictly forbidden to cut the battery charging and
discharging lines.
It is strictly forbidden to disassemble the battery box or modify
the internal structure and protection board of the lithium battery.
It is strictly forbidden to disassemble the battery box or modify
the internal structure and protection board of the lithium battery.
After using the battery, please charge it within 12 hours.
If the product has problems with the following forms during the
protection period, we will provide customer service as part of the
product quality guarantee.

Related product manuals