Need help?Do you have a question about the ENGWE L20SE and is the answer not in the manual?
Install the front mudguard by connecting the lifting lug and aligning the fender bracket.
Install the front wheel into the fork slot and secure it with a 15mm wrench.
Install the front basket using the provided bolts and a 4mm hexagon wrench.
Correctly install the left (L) and right (R) pedals by tightening them clockwise or counterclockwise.
Details the intelligent LCD display model YL80C, its specifications, and appearance.
Explains display functions, layout, and button definitions.
Covers power on/off, display interface, and push assistance mode.
Details headlight control, assist level, battery level, and error code indications.
Explains how to reset trip distance, adjust backlight, and set metric/imperial units.
General| Model | ENGWE L20SE |
|---|---|
| Type | Electric Bicycle |
| Motor Power | 250W |
| Max Speed | 25 km/h |
| Frame Material | Aluminum Alloy |
| Wheel Size | 20 inches |
| Brakes | Disc Brakes |
| Weight | 25 kg |
| Charging time | 4-6 hours |
| Gears | 7-speed |
| Load Capacity | 120 kg |
| Suspension | Front Suspension |
| Display | LCD Display |
| Foldable | Yes |
| Lights | Front and Rear Lights |
To Next Page
