Automatic Folding Switch
The Automatic Folding switch is located on the control pod. The switch can be used instead of the remote
control to open and close the scooter. To close the scooter, press the Automatic Folding Switch toward the “II”
and hold the button, the scooter will fold, release the button when the scooter is fully closed. To open the
scooter, press the Automatic Folding Switch toward the 1 and hold the button down, the scooter will open, release
the button when the scooter is fully opened.
Speed Control Knob
The speed control knob is used for controlling the scooter’s speed. Adjust the knob to the left for slower speeds;
adjust the knob to the right to increase the speed.
Brakes
The MOJO Scooter is equipped with electromagnetic brakes. Releasing the directional control lever will stop the
scooter.
Horn
The horn is located on the front side of the control unit. When you press the button, the horn will sound.
Armrests
Armrests come standard with the MOJO. The scooter can be used with or without the armrests. To install the
MOJO armrests, slide the right armrest into the right armrest bracket and insert the thumb screw at desired height
(pic 1). Repeat on the left side.
The angle of the armrest can be adjusted by adjusting the height of the screw in the armrest. The higher the
screw, the higher the pitch of the armrest (pic 2).
1
2
To Next Page