Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect the
contents of the box for scratches in the paint, dents that may have occurred during shipping. Because the scooter was 98%
percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
Please keep this box in case you need to send the scooter for service or repairs. If you use another box, ENJOYBOT will not be
responsible for any damage caused during shipping.
Estimated Assembly and Set-Up Time
Allow up to 2 minutes for assembly, not including initial charge time.
SLIPPING HAZARDS:
TRIPPING HAZARDS:
COLLISION HAZARDS:
ENJOYBOT
ELECTRIC SCOOTER
USER S MANUAL‘
H3/H3 PRO
To Next Page
Loading...
