Enjoybot H3 - Assembly and Setup; Handlebar Assembly; Unfolding the Scooter; Folding the Scooter

ASSEMBLE AND SET UP
4
Page
5
Page
Tightening the handlebar one by one.
Handlebar Assemble
ASSEMBLE AND SET UP
Folding the Scooter
1.Press the folding bar with hands.
1.Hold the handlebar stem and
pull the folding bar slightly.
2.Push down the handlebar stem slightly. 3.Folded finished after hearing a click.
2.Stand up the handlebar stem. 3.Unfolding finished after hearing a click.
Unfolding the Scooter
Folding hole
Km/h
WARNING:
!
Always do not insert the finger in the foldng hole,
it will make the finger in injury even cut off.