enphase IQ8MC User Manual

IQ8MC/IQ8AC/IQ8HC Microinverters Installation and Operation Manual
25 © 2023 Enphase Energy Inc. All rights reserved. October 2023
USM-00008-1.0
Set up and activate monitoring
To install the IQ Gateway and set up system monitoring and grid management functions, refer to the IQ Gateway
Quick Install Guide. This guide leads you through the following:
• Connecting the IQ Gateway
• Detecting devices
• Connecting to the Enphase Installer Platform
• Registering the system
• Building the virtual array
NOTE: When the utility requires a profile other than the default IEEE 1547 (for example, grids managed by
Hawaii electric industries [HEI], including HECO), you must select an appropriate grid profile for your
installation.
You can set the grid profile through the Enphase Installer Platform, during system registration, or through the
Enphase Installer App at any time. You must have an IQ Gateway to set or change the grid profile.

enphase IQ8MC Specifications

General

Model	IQ8MC
Manufacturer	Enphase
Category	Microinverter
Nominal Output Voltage	240 V
Nominal Frequency	60 Hz
Max DC Input Voltage	60 V
Enclosure Rating	IP67
Maximum Input Power	440 W
Start-up Voltage	22 V
Maximum Output Power	330 VA
Warranty	25 years
Efficiency	97.0%
Operating Temperature Range	-40°C to +60°C