enphase IQ8MC User Manual

IQ8MC/IQ8AC/IQ8HC Microinverters Installation and Operation Manual
37 © 2023 Enphase Energy Inc. All rights reserved. October 2023
USM-00008-1.0
Power factor setting 1.0
Grid-tied power factor (adjustable) 0.85 leading…0.85 lagging
Peak efficiency
240 VAC
208 VAC
%
97.31
97.21
CEC weighted efficiency
240 VAC
208 VAC
%
97.00
96.50
Night-time power consumption
240 VAC
208 VAC
mW
22
29
Features and specifications
Ambient temperature range -40°C to 65°C (-40°F to 149°F)
Relative humidity range 4% to 100% (condensing)
DC connector type Stäubli MC4
Dimensions (H x W x D) 212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2")
Weight 1.1 kg (2.42 lbs)
Cooling Natural convection - no fans
Approved for wet locations Yes
Pollution degree PD3
Enclosure
Class II double-insulated, corrosion-resistant polymeric
enclosure
Compliance
Compliance
CA Rule 21 (UL 1741-SA), UL 62109-1, IEEE1547:2018 (UL 1741-
SB), FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-
C22.2 NO. 107.1-01
This product is UL-Listed as PV rapid shutdown equipment
and conforms with NEC 2014, NEC 2017, NEC 2020, and NEC
2023 section 690.12 and C22.1-2018 Rule 64-218 rapid
shutdown of PV systems, for AC and DC conductors, when
installed according to manufacturer’s instructions.
1. No enforced DC/AC ratio. See the compatibility calculator at https://enphase.com/installers/microinverters/calculator.
2. The nominal voltage range can be extended beyond nominal if required by the utility.
3. Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.

enphase IQ8MC Specifications

General

Model	IQ8MC
Manufacturer	Enphase
Category	Microinverter
Nominal Output Voltage	240 V
Nominal Frequency	60 Hz
Max DC Input Voltage	60 V
Enclosure Rating	IP67
Maximum Input Power	440 W
Start-up Voltage	22 V
Maximum Output Power	330 VA
Warranty	25 years
Efficiency	97.0%
Operating Temperature Range	-40°C to +60°C