Need help?Do you have a question about the Entes DTR-20 and is the answer not in the manual?
General| Type | Digital Timer |
|---|---|
| Supply Voltage | 230 VAC |
| Frequency | 50/60 Hz |
| Output | Relay |
| Mounting Type | DIN Rail |
| Display | LCD |
| Protection Class | IP20 |
| Contact Rating | 250V AC |
Important safety instructions and disclaimer for device installation and operation.
How to switch C1 and C2 relays to manual mode and exit it.
Shows the current date and time.
Displays the calculated sunrise and sunset times.
Shows relay operation counts and program activity status.
Introduction to program creation and available settings.
Choosing the relay output (C1 or C2) for a program.
Setting activation based on time, sunrise, or sunset.
Setting the specific days of the week for program activation.
Configuring when a program should deactivate.
Managing time conflicts and merging programs using logical AND operations.
Resetting relay timers and observing menu settings.
Configuring language, geographical location, and time zone.
Setting up DST rules for Europe, USA, or custom parameters.
Adjusting the device's date, time, and century.
Adjusting screen contrast and setting temporary program deactivation for holidays.
Setting up and activating password protection for menu access.
Defining how the device automatically exits manual mode.
Step-by-step guide to changing the device's password.
Restoring factory settings and viewing device software/hardware versions.
How to exit the main programming menu.
Details on the device's size and mounting method.
Wiring diagram for connecting the device.
Key technical specifications of the timer.
To Next Page
