Need help?Do you have a question about the Entes DTR-10 and is the answer not in the manual?
General| Supply Voltage | 230V AC |
|---|---|
| Frequency | 50/60 Hz |
| Output | Relay |
| Number of Outputs | 1 |
| Output Type | SPDT |
| Time Range | 0.1s to 100h |
| Mounting Type | DIN Rail |
| Protection Class | IP20 |
| Output Rating | 250V AC |
Explains the function of ESC, SET, UP, and DOWN buttons for navigation and control.
Details safety measures, installation requirements, and manufacturer disclaimers for safe operation.
Describes how to activate and deactivate manual mode for relays C1 and C2.
Details various monitoring screens like Real Time, Sunrise, Sunset, and Program Activity.
Outlines 15 programs (P01-P15) and configuration options like edit and delete.
Configures relay output (C1/C2) and activation time based on Time, Sunrise, or Sunset.
Configures the specific days of the week (Mon-Sun) for program activation.
Sets the time or event for the program to deactivate the relay output.
Explains time conflict checks, program validation, and how to save settings.
Resets relay operation counts/times and observes sub-menu settings.
Sets geographical coordinates, time zone, and DST parameters for accurate time calculations.
Adjusts the device's current date, clock time, and century settings.
Adjusts the screen contrast level between 00 and 15.
Configures how the device exits manual mode (disabled, next program, or timer).
Manages password activation, deactivation, and default settings for security.
Describes the process of changing the existing password for the device.
Covers returning to factory settings, viewing version info, and exiting programming menus.
Provides physical dimensions and a wiring diagram for installation.
Lists electrical and mechanical specifications like voltage, current, temperature, and protection class.
To Next Page
