13
14
TECHNICAL FEATURES
Program Number
5 Years
Battery Shelf Life
15
Screen Size
Accuracy
Power Consumption
Mechanical Features
Equipment Protection Class
Ambient Temperature
Protection Class
Installation
Dimensions
Weight
Quantity in 1 Package
Refresh Time
Output Contact
Operating Voltage (U
n
)
Electrical Features
1,3” LCD
1 sec./Day
< 5 VA
1 sec.
2 C/O , 16 A / 4000 VA
Class II ( )
-10°C ... +55°C
IP20
Rail Mount
PK25
0,2 kg
5 pcs
Please look at the side label
Due to the structure of LCD screens, the liquid inside them starts to freeze below its operating temperature.
This causes the screen to respond slower or not respond at all. Device's other functions are not affected from this
and it opens/closes its relays as programmed. After the device temperature rises back to the operating range,
LCD screen starts to work normally.
DIMENSIONS
CONNECTION DIAGRAM
L1
N
L2
L3
Un
C1
C2
1
A1
3
2
1
A2
3
2
TYPE PK25
35 mm
90 mm
45 mm
62 mm
58 mm
32 mm
48 mm
35 mm
Note: The contact resistance at ohmic load ( eg: Incandescent bulb, Resistance devices ) is 16A.
It is recommended to use a contactor if the inductive load (eg: AC motor, fluorescent,etc.) or
capacitive load (eg: Led Drivers, UPS, Fluorescent ( Electronic Ballast), etc.) switch. Otherwise
adhesion may occur in relay contacts.
13
To Next Page
Loading...
