Entrematic PAS024AS - User Manual

Entrematic PAS024AS(W)
1
2
3
4
8
5
6
7
TECHNICAL SPECIFICATIONS
1. cover
2. radar antenna (wide field)
3. radar field size adjustment
4. IR-prism (2 m)
DESCRIPTION
Presence
Typical response time: <256 ms
Active infrared with background analysis
Spot diameter: 0.1 m (typ)
Number of spots: 24
Number of curtains: 2
From -4 ° to +4 ° (adjustable)
Solid-state-relay
(free of potential, free of polarity)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
0.3 s to 1 s (not adjustable)
Typical: < 5 ms
ENGLISH
Opening & safety sensor
for automatic sliding doors
5. main connector
6. IR-angle adjustment
7. push button for setup or DIP-setting confirmation
8. DIP-switch
12 V - 30 V DC -5%/+10%
(to be operated from SELV compatible power supplies only)
< 2.2 W
1.8 m to 3 m
< 1 V : Log. L; > 10 V: Log. H (max. 30 V)
-25 °C to +55 °C
IP54
< 70 dB
20 years
EN 16005; EN 12978; EN IEC 62061SIL2, EN 61496-1 ESPE Type 2; EN ISO 13849-1
Pl «c»
CAT.2 (under the condition that the door control system monitors the sensor at least once per door cycle)
Supply voltage:
Power consumption:
Mounting height:
Sensitivity of the test input:
Temperature range:
Degree of protection:
Noise:
Expected lifetime:
Norm conformity:
Motion
Min. detection speed: 5 cm/s
Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP
Transmitter power density: < 5 mW/cm2
From 15 ° to 50 ° vertical (adjustable)
Solid-state-relay
(free of potential, free of polarity)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
0.5 s
Detection mode:
Technology:
Angle:
Output:
Hold time output signal:
Response time on test request:
PAS024ASW: energy-saving unidirectional sensor
PAS024AS: bidirectional sensor
User’s Guide for product version 0200 and higher
See product label for serial number
Specifications are sub
j
ect to chan
g
es without prior notice. All values measured in specific conditions
.
GREEN
LED
RED
LED

Summary

Product Description

Technical Specifications

Mounting and Wiring

Radar Field Settings

Infrared Field Safety

DIP-switch Settings

Setup Procedures

LED Signals and Troubleshooting

Orange LED Flashing

Troubleshooting for various orange LED flash patterns, indicating internal faults or power issues.

Orange LED On

Indicates a sensor memory problem, often resolved by power cycling or sensor replacement.

Red LED Flashing

Signals issues during assisted setup, such as incorrect IR curtain angles or the need for a new setup.

Red LED Sporadic

Indicates the sensor detects the door, is disturbed by external factors, or requires angle adjustment.

Green LED Sporadic

Suggests disturbance from rain, leaves, or ghosting, recommending critical environment presetting.

LED Off

Troubleshooting for when the LED is off, checking connections or power supply to the test output.

Output Reaction Mismatch

Addresses situations where the door's reaction does not match the LED signal, suggesting activation mode changes.

Entrematic PAS024AS Specifications

General

Brand	Entrematic
Model	PAS024AS
Category	Accessories
Language	English