Why is my Entrust Datacard CR825 not available even when it displays Ready?
If your Entrust Datacard Printer shows 'Ready' on the LCD but remains unavailable, troubleshoot the computer-to-printer communication link. Verify the computer-to-network connection by accessing a network resource. Your network administrator can also test communication between a server and the printer. Ensure the user is logged into the network.
What to do if my Entrust Datacard CR825 is not configured with the correct network address?
Ensure the server name or IP address is entered in the Port Settings or Configure Port dialog box on the computer. Also, make sure that Ready displays on the printer's LCD panel.
General| Print Resolution | 300 dpi |
|---|---|
| Card Capacity (Input) | 100 cards |
| Card Capacity (Output) | 100 cards |
| Print Technology | Dye-sublimation |
| Card Sizes | CR-80 (85.6 mm x 54 mm) |
| Connectivity | Ethernet and USB |
| Interface | USB and Ethernet |
| Operating System Support | Windows 7, 8, 10, Server 2008 R2, 2012, 2016 |
| Print Capabilities | Single-sided |
To Next Page
