The ENVIG EDGE is a facial device designed for exfoliation to improve skin appearance, giving it a luminous and smoother look and feel. It utilizes Pollogen's fractional resurfacing technology, originally developed for professional clinics and adapted for safe and effective home use.
Function Description:
The device works by emitting energy pulses from its treatment head when placed flat against the skin and the trigger button is pressed. During an energy pulse, the headlight briefly turns blue, accompanied by a vibration sensation. A beep indicates the end of the pulse, after which the device can be moved to an adjacent area. The treatment covers the entire face using a methodological pattern, ensuring no area is treated more than once. Different power settings (low, medium, high) can be selected based on the sensitivity of the treatment area, such as perioral or periorbital regions.
Important Technical Specifications:
- Weight: 120gm
- Physical Dimensions: H=38mm L=157mm W=52mm
- Operating Temperature: +5°C to +30°C
- Operating Humidity: 30RH to 80RH
- Rating: 5V, max 2A
- Transport and Storage Temperature: -10°C to 60°C
- Transport and Storage Humidity: 30RH to 80RH
Usage Features:
- Charging: The device is charged via a USB cable. A blinking green LED indicates charging, a steady green LED indicates a full battery, a slow blinking red LED indicates low battery, and a fast blinking red LED indicates a depleted battery. A full charge takes approximately 1-2 hours and provides about 30 minutes of continuous use. The device will not operate while charging.
- Treatment Preparation: Before use, all jewelry should be removed, and the skin should be cleansed and dried, free of topical products like makeup or moisturizers. The face is divided into four treatment areas: right cheek, left cheek, forehead, and perioral (around the mouth).
- Power Levels: The device has three power levels: low, medium, and high. The power level can be changed by pressing the Power Button during treatment. It is recommended to start at the lowest level and increase as comfort allows.
- Treatment Process:
- Turn on the device by pressing the Power Button (for 2 seconds to turn off). The headlight and low power level LED will turn white.
- Select the desired power level.
- Place the treatment head flat against the skin and press the Trigger Button to emit energy.
- Move to the adjacent location after the beep.
- Cover the entire face methodologically.
- Post-Treatment: After covering the entire face, the treatment is complete. The device should be turned off, and its treatment head cleaned with alcohol wipes before covering it with the protective cover.
- Recommended Treatment Guidelines:
- Full face treatment takes 3-4 minutes. For shorter times, focus on key areas.
- For optimal results, use the device 2-3 times a week.
- Perform regular skincare after use.
- Ensure at least one day between treatments on the same area.
- Individual responses may vary due to environmental, biological, genetic, and age factors.
- Avoid direct sun exposure after treatment.
Maintenance Features:
- Cleaning: The treatment head should be cleaned with alcohol wipes after each use.
- Troubleshooting: If the device is not working, check the following:
- Ensure the protective cover is removed.
- Verify the Power Button is not stuck and the headlight and low power level LED are white.
- Check that the treatment level LED is working.
- Confirm the device is fully charged (steady green indicator).
- Ensure the Trigger button is not stuck, and the blue LED illuminates with vibration and a "Beep" sound.
- If issues persist, contact customer support.
Safety & Cautions:
- Use only for its intended facial exfoliation purpose and for personal use.
- Keep out of reach of children under 18.
- Do not use if pregnant, lactating, or within six months postpartum.
- Avoid use with severe allergies, sensation disorders, infected skin, heart conditions, pacemakers, or other electrical medical devices without physician consultation.
- Exercise caution around facial jewelry or metal implants (excluding dental fillings, implants, and crowns).
- Do not immerse in water. Discontinue use if damaged, disassembled, broken, or submerged.
- Consult a dermatologist if you have medical concerns, recent cosmetic procedures, acid/chemical peels, extreme sunburn, or thread lifts.
- Do not use on eyelids, eyes, active acne, psoriasis, eczema, rosacea, open sores, rashes, sunburned/distressed skin, or skin with cuts/abrasions.
- Do not use on tattoos or permanent makeup in the treated area.
- Do not use on moles, cancerous areas, or skin lesions recently treated with laser or chemicals.
- Avoid use if taking medications, herbal preparations, food supplements, or vitamins that might cause fragile skin or impaired skin healing.
- Discontinue use and consult a physician if extreme discomfort or worsening skin conditions occur.
- Do not use if the device or charging cable is damaged.
- Keep the device away from water sources during charging.
- Ensure skin is completely dry before use.
- Do not treat wet or sweaty skin.
- Do not use the device right after cosmetic peeling/exfoliation treatment.
Possible Side Effects:
Rare, temporary side effects may include damage to natural skin texture, discomfort, or pain. Redness (erythema) and minor skin swelling (edema) may occur in the treated area, typically disappearing shortly after. A tingling sensation may be felt during and after use. If any side effects persist for more than 24 hours, consult a physician.
Need help?
General
To Next Page