9
USING THE EDGE DEVICE
CHARGING INSTRUCTIONS
We recommend charging the device before each use.
1. Open the box containing the device and remove the device and its USB
cable.
2. Connect your Device to a USB outlet to begin charging (Fig.6).
3. Once charging is completed disconnect the USB cord.
LED INDICATORS
The LED next to the USB port indicates the current state of the battery.
Notes:
• It should take approximately 1-2 hours to fully charge the device.
• A fully charged device will last approximately 30 minutes of continuous use.
• The device will not work, while charging.
FIG.6
LED COLOR INDICATOR STATE
Blinking green Battery Charging
Steady green Battery Full
Blinking Red (slow) Battery Low
Blinking Red (fast) Battery Depleted
To Next Page
Loading...