The EnviroRides R1+ Electric Scooter is a high-performance eTransport specialist designed for a single rider, emphasizing safety and legal compliance. This user manual outlines the product's features, operation, maintenance, and warranty information.
Function Description:
The R1+ Electric Scooter is a personal electric transport device intended for individual use. It is designed for efficient and powerful travel, with features aimed at both performance and user safety. The scooter is equipped with a range of controls and indicators to manage speed, lighting, braking, and motor functions. It is crucial for users to familiarize themselves with these controls and adhere to all safety guidelines and legal regulations for electric scooters in their respective regions. The scooter is not intended for use as a medical or mobility aid, nor for carrying multiple passengers.
Important Technical Specifications:
- Model: R1+ 3600W Electric Scooter by EnviroRides.
- Max Load: 120KG.
- Range: 45 miles (under optimal conditions and 65kg rider weight).
- Tyres: 10-inch heavy-duty tyres.
- Ride Incline: 30°.
- IP Rating: IP54 rated, indicating protection against dust and splashing water.
- Brakes: Hydraulic brakes, front and rear disc brakes.
- Motor: 3600W motor.
- Battery: Lithium battery (voltage P1: 42, motor setting P2: 17, P3: 1, P8: 100).
- Charging: UK mains socket (AC100-240V) charger with overload protection.
- Bearings: Exclusive Dunlop bearings.
- Display: LCD display showing time, trip, odometer, distance, voltage, and channel.
- Controls: Electronic horn, alarm set, ECO/TURBO mode switch, dual motor switch, key & ignition switch, mode button, power button.
- Lights: Lights, dual headlights, rear brake light.
- Additional Features: USB charging port, kickstand, front and rear suspension, mudguard.
Usage Features:
- Powering On: The scooter is powered on by first activating the on/off button on the base, then turning the ignition key clockwise or pressing the key fob ignition button twice, and finally holding the power button.
- Speed Settings: The speed settings can be adjusted by pressing the power button once (to make the speed setting symbol flash) and then using the mode button to change the setting. The power button must be pressed again to lock the setting.
- Display Readings: The mode button allows users to scroll through various readings on the LCD screen, including time, trip, odometer, distance, voltage, and channel. Holding the mode button clears the "Trip" log.
- Remote Fob: The remote fob provides functions such as Power On (press twice), Unlock (press twice to turn off), Lock (press twice), and Mute (press twice).
- Folding Mechanism: The scooter can be unfolded by lifting the stem forward. The stem clamp should then be slid down over the folding mechanism, ensuring it sits flush to the bottom, and the lever closed to secure it tightly.
- Braking: Users are advised to familiarize themselves with the brakes, which may be tight initially. Gradual braking at slow speeds is recommended to bed them in and prevent warping of the brake discs. Simultaneous use of accelerator and brakes is discouraged. Dual braking (using both brakes) is recommended in wet or icy conditions.
- Tyre Pressure: Maintaining correct tyre pressure is essential to prevent failure, collision, or damage. Riding with low or flat tyres can damage the alloy and tyres.
- Riding Conditions: The scooter should only be ridden in permitted areas, adhering to local laws and national legislation. Caution is advised in wet or icy conditions, with reduced speed. The scooter should not be exposed to excessive water or moisture.
- Safety Precautions: Always wear protective clothing. Do not ride under the influence of drugs or alcohol, or if feeling unwell. Avoid using mobile devices while riding. The scooter is for riders aged 18 and above.
Maintenance Features:
- Pre-Ride Checks: Before each use, all fixtures and fittings must be checked. Ensure a clear area for riding and check surroundings to avoid accidents.
- Battery Care: The lithium battery should ideally be kept fully charged for optimum life and performance. Prolonged periods of being uncharged can impair performance and battery life. For lengthy storage, disconnecting the battery from the controller units and charging separately is recommended. The charger has overload protection.
- Malfunction Identification: The manual provides symbols for "Brakes Activated," "Motor Fault," "Throttle or Motor Fault," and "Controller Unit Fault" to help identify potential issues. Possible causes for these faults (e.g., damaged brake levers, motor cables, controller unit) are listed.
- Malfunction Reporting: If a malfunction occurs, users should photograph the error symbol and notify EnviroRides via their Warranty Process Form or Servicing & Repairs Process Form.
- Packaging for Returns: Original packaging should be retained for any returns or servicing, as items returned without it or in unsuitable packaging may not be refunded or may incur additional costs.
- Professional Servicing: Servicing or repair is recommended to be performed only by a qualified EnviroRides Technician. Attempting repairs without expertise may negate the warranty.
- Battery Storage: The battery and scooter should not be stored in environments where temperatures exceed 30 °C or fall below -10 °C.
- Water Detection Label: The battery is equipped with a water detection label; tampering with or removing it will void the warranty.
- Charger and Charging Port: Chargers and charging ports are not covered under warranty.
- Disassembly: Do not disassemble the battery, as it contains harmful substances.
- Installation of Parts: When performing maintenance, turn off the power, install parts correctly, and avoid overtightening to prevent damage.
Warranty Details:
The R1+ Electric Scooter comes with a Limited 2-Year Warranty from EnviroRides, covering defects in materials, parts, and workmanship from the date of delivery/collection. This warranty is non-transferable and applies only to the original purchaser. It does not cover wear and tear, accidental damage, misuse, or damage from poor maintenance. Covered components include the motor (2 years), frame (2 years), controller unit(s) (2 years), and battery (1 year). All warranty claims require the original buyer's receipt or proof of purchase and evidence of fault, along with the eScooter's VIN Number. EnviroRides may require the component or item to be sent for inspection. Refunds are subject to EnviroRides' returns and refunds policy.
Need help?
General
To Next Page
