Battery & Charger
5.1) Each R1+ Electric Scooter is equipped with a lithium battery
and charger. Do not dispose of any packaging until you have
checked for each component in the event that the carton may
have been opened incorrectly i.e., upside down.
5.2) The R1+ Electric Scooter can be charged at any battery
level, but for optimum battery life and performance it is best to
keep fully charged. If left uncharged for long periods, then this
may impair performance and battery life. Damage caused to your
battery through misuse will not be covered under warranty.
5.3) A fully charged eScooter may stand uncharged for 30-40
days (approx). An uncharged / low charged eScooter may stand
for 20-30 days (approx). Please note how long you leave your
eScooter uncharged to prevent irreparable damage to the unit.
5.4) If you anticipate not using your R1+ Electric Scooter for a
lengthy period. We recommend disconnecting the battery from
the eScooter controller units and charging separately as this
helps prolong battery life.
5.5) The R1+ Electric Scooter charger has an overload protection
function which means that the charger will not overcharge the
battery once fully charged.
5.6) Connect the charger directly to your R1+ Electric Scooter
charging port. Ensure the charging port is dry, clear of moisture
and any debris before connection. Once connected plug the
charger into a UK mains socket (AC100-240V).
5.7) The charger light will go red when charging and green when
the battery is fully charged. Disconnect when green.
To Next Page
Loading...
