4.3) DO NOT USE THE ELECTRIC SCOOTER WITHOUT
CHECKING ALL FIXTURES AND FITTINGS.
4.4) Ensure you have a clear area before using the R1+ Electric
Scooter. Check your surroundings when riding your eScooter to
avoid accidents, collisions, or damage to the rider, others, or the
eScooter.
4.5) Power up your R1+ Electric Scooter.
The R1+ Electric Scooter is set to speed one and to soft start
from dispatch to ensure your safety. Slowly press the accelerator
whilst keeping one foot aside in case you need to stop. Slowly
increase the acceleration as you become more capable and
proficient.
4.6) Braking. Ensure you are familiar with your brakes before
riding. As this is a new item the brakes may be tight for the first
few trips, bed them in at slow speeds and do not brake sharply or
erratically as this will cause warping of the brake discs and
reduce braking capabilities. Never use the accelerator and
brakes at the same time.
4.7) Maintain correct tyre pressure. Over or under inflated tyre
pressure may increase risk of failure, collision, or damage. Do not
ride with low or flat tyres, this will damage the alloy and tyres.
4.8) Always wear protective clothing when riding.
4.9) Use extra caution in wet or icy conditions, reduce speed to
minimum and use dual braking (the use of both brakes in
conjunction) to reduce chance of skidding.
4.10) Do not expose your eScooter to excess water or moisture.
Do not ride in heavy rain, sleet, snow or through rivers and
streams.
To Next Page
Loading...
