EasyManuals Logo

Envirovent energiSava 250 Installation Guide

Envirovent energiSava 250
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20 energiSava
®
250
01423 859 395
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
Filter Maintenance
Filters must be inspected every 6 months and replaced at least
every 12 months. If filter maintenance is not carried out, it can
invalidate the warranty.
Isolate the unit from the mains supply
Remove the filter caps, replace both filters then reinsert filter caps.
Engage the mains supply then reset the filter indication by
pressing the minus button for 10 seconds. The filter change
indication can also be reset via the remote control as shown on
page 16.
Not maintaining the filters during the life of the product can
invalidate the warranty. Filter change indication duration is factory
set to 12 months.
Press for
10 seconds
Filter Replacement Filter Indication

Other manuals for Envirovent energiSava 250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Envirovent energiSava 250 and is the answer not in the manual?

Envirovent energiSava 250 Specifications

General IconGeneral
BrandEnvirovent
ModelenergiSava 250
CategoryHeating System
LanguageEnglish

Related product manuals