Envirovent energiSava 250 Installation Guide

15
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
DO NOT
THROW AWAY
Wireless Remote Control
To view the current status of the unit:
• Press any button to wake the remote control and the relevant LEDs will
light up according to the current status of the unit.
To manually activate or deactivate the boost function:
• Press any button to wake the remote control.
• Press the button again, the boost LED will flash (red). After 2 seconds
the unit will enter boost mode (default setting is 20 minutes) then
automatically return to trickle mode.
• If the switch live connection is turned on then boost cannot be
cancelled until the switch live connection is turned off.
• To deactivate the boost mode, repeat the above steps.
To switch between auto and manual summer bypass modes:
• Wake the remote control.
• Press and hold the button for 5 seconds, the filter LED will flash green.
• Press the button once to switch to edit the summer bypass mode.
• Press and hold the button for 5 seconds to switch between summer
bypass modes.
• Auto = Bypass LED constant, Manual = bypass LED flashing.
Boost LED
Summer Bypass LED
Frost LED
Humidity LED
Filter LED
Remote control button
Button LED 2
Button LED 1

Envirovent energiSava 250 Specifications

General

Brand	Envirovent
Model	energiSava 250
Category	Heating System
Language	English