Envirovent energiSava 325 User Manual

10
AFTER INSTALLING THIS UNIT,
PLEASE PASS ONTO END USER
DO NOT THROW AWAY
Wiring Diagrams
Switching and Controls
Volt-free control of Summer Kick Up using
one way latching switch.
Volt-free Boost switching of MVHR.
There is maximum of 10 single pole switches
or humidistats that can be used.
To Boost using switch live, a relay is required.
(SWHT-BOXRELAY)
Volt-free setback switch or
normally open relay contacts
11
2323
Volt-free
sensor
Volt-free Setback switching of MVHR controller
PCB using single-pole latching switch and / or
volt-free normally open relay contacts.
To avoid the unit being inadvertently left in
setback mode, it is recommended that only
one latching switch is fitted.
Latching Summer
Kick Up switch
(SWHT-BOOST-L)
Momentary Boost
switch
(SWHT-BOOST-M)

Envirovent energiSava 325 Specifications

General

Brand	Envirovent
Model	energiSava 325
Category	Heating System
Language	English