3.11
Ethernet connection
For the EO Hub to communicate
to the EO Cloud back oce, an
Internet connection is required.
This can be achieved by using
an Ethernet lead connecting to
the client’s network.
As standard, the EO Hub
IP address and DNS server
address are assigned via DHCP.
Once assigned, it is best if
the IP address is reserved in
the Server DHCP table where
possible. For sites where a xed
IP address is required please
contact EO Support who can
advise further.
3.12
Sites having rewalls
There are other options
available if a static IP address is
strictly requested by your Host.
This can be discussed with the
EO support team, who can
provide further information.
3.13
Firewall Port Settings:
+ TCP ports 4455 must be
open allow the outgoing
connection.
+ TCP and UDP port 53 must
be open for DNS and is
critical.
EO Genius & EO Hub Installation Guide
© EO Charging 2021 22
3.0
Ethernet connection
& Network security
settings.
To Next Page
Loading...
