3.19
Starting a charging session
1. Unlock the vehicle
2. Plug the cable into the
vehicle
3. Plug the other end of the
cable into the EO Genius
4. The charging session
shall start (subject to any
authentication settings
applied)
Stopping a charging session
1. Stop the charging session
from the vehicle e.g. by
unlocking the vehicle
2. Remove the cable from the
vehicle
3. Remove the cable from the
EO Genius
3.20
Storage of tethered cable
When not in use, the tethered
cable, if applicable, should
be wound up and stored on
a locally provided hook. The
plug should latched into the
plug holder on the front of the
charger.
3.21
Cleaning
It is recommended to
periodically clean the terminals
of the socket with a suitable
solvent based cleaner to ensure
that the socket is free from dirt
and other contaminates.
EO Genius & EO Hub Installation Guide
© EO Charging 2021 28
3.0
Normal operation.
To Next Page
Loading...
