EO Mini Pro 2 - Page 5

01
Ensure that the EO Mini Pro 2 is powered and that the
Status LED is pulsing blue.
02
Insert the cable into the vehicle rst.
03
Insert the other end of the cable into the EO Mini Pro 2.
04
The vehicle should start to charge immediately or will
charge at the scheduled time.
2.2
Stopping the Charge.
01
Stop the charging session from the vehicle e.g.
unlock the vehicle.
02
Remove the cable from the vehicle rst.
03
Remove the cable from the EO Mini Pro 2.
EO Mini Pro 2 User Manual
© EO Charging 2020 4
2.1
Starting the Charge.