*Touch to hold Line 1 & accept the incoming call (Line 2) or
*Touch
to end Line 1 & accept the incoming call
To switch calls between the two lines:
*Touch to switch between lines
Hold the call
*When you on phone , Touch
to hold the call . the screen will display “ ON HOLD”
Interchanging VC100B and Handset
You may interchange the call between your handset and VC100B while conversation is
ongoing.
To shift fromVC100B to handset or vice versa:
*Touch
and hold for 3 seconds
* Disconnect the device
Selecting “ Desconnect ” and Touch .the LCD will display “ Disconnect device?
“ selecting the (YES) and Touch
to disconnect the device with the mobile phone.
Selecting the ( NO) and Touch
return to the last interface.
G. Parking Assistant
To turn the on-screen display guideline ON/OFF:.
Touch to show and cancel the parking line on the screen
NOTE: Interference may occur if Bluetooth*function & Backup Camera function are activate
at the same time.
Parking / Avin
Touch and hold to parking
Touch and hold
to Avin
BUTTON FUNCTIONS AND OPERATION