OPTIC CONFIGURATION
e EOTECH Holographic Weapon Sight (HWS)
product line has two dierent heights above the rail
based on user preference. For this reason, the mag-
nier does not come preassembled to the mount.
It is user congurable based on the specic model
HWS it will be mounted behind. e 7mm riser,
included, may be required to align the magnier
optical axis with the sight. Only HWS models with
side buttons or quick detach levers require the use of
the riser. For all other HWS models, the riser should
not be used.
e magnier system can be congured to switch to the le or to the right based on shooting preference.
Typically, right handed shooters prefer the mount to switch to the le, and le handed shooters to the right.
To congure your HWS you will need a screwdriver (not included). If the spacer is not used, the shorter
screws should be selected. e longer screws are used with the spacer only. If the spacer is being used, place
the spacer on the optic mounting interface. Open the STS mount. Position the mount on the optic mount
interface (or riser) so it opens either to the le or right (based on preference). Insert each screw through the
components, and tighten securely.
INTRODUCTION
ank you for purchasing EOTECH’s new Generation III 3X
magnier. ese magniers oer users of the Holographic
Weapon Sight (all models) the additional advantage of vastly
improved target recognition and increased lethality at medium
range distances. e new Switch to Side (STS) mount allows
the user the ability to engage the enemy with condence in a
Close Quarters Battle (CQB) situation or at distances out to 600
meters or more. is user manual describes the features of the
EOTECH Magniers and provides information on their use and maintenance. Please read the instructions
carefully before mounting and using the magniers. Always practice proper rearm safety.
USER’S MANUAL FOR G33™
For use with G33 Magniers
or HHS Systems
e G33 is controlled under the Export Administration Regulations (EAR) ECCN 0A987, and may not be exported to a
foreign person, either in the U.S. or abroad, without a license or exception from the U.S. Department of Commerce
SPECIFICATIONS:
G33 3x Magnier
Magnication Fixed: 3X
Eye Relief: 2.2” (55.8mm)
Field of View: 7.3 degrees
Length: 3.9” (99mm)
Width: 2.2” (55.9mm)
Height: 3.3” (83.9mm) with spacer
Weight: 11.2oz (317.5g) with mount
Water-Resistant: 33 . (10m)
Sealing: Fog-resistant internal optics
Retrots to all HWS models with 7mm riser
Finish: Non reective / Rubber coated
Optical Axis Adjustment: Internal adjustment
Switch Orientation: Ambidextrous mount Flip Orientation to
allow le or right ip
Rail Interface: 1” Weaver or MIL-STD-1913 with Quick
Detach lock
Magnier Interface: User congurable height with quick
detach mount
Included:
• 3x Magnier • Switch to Side (STS) Mount• 7mm Riser • 4 Screws
BASIC OPERATION
e G33 magnier is designed to be used behind an EOTECH Holographic Weapon Sight (HWS). e magni-
er can be mounted directly behind the HWS. Simply switch the magnier out of the way and operate the
sight. When used with HWS models 518, 558, 556, 517, EXPS or 516 HWS (with side button interface) the
user can easily operate the sight even with the magnier in the locked position.
Positioning the Reticle:
Once the magnier is installed properly behind the HWS, it may be necessary to re-zero the sight. is may
be due to the shooter’s ability to see the target and Point of Impact (POI) more accurately than without the
magnier. Re-zeroing the sight will prevent a perceived shi in POI when going from no magnication to
magnication.
Aer zeroing or re-zeroing the sight, it may be necessary to reposition the reticle image into the center of the
magnier window. is is aesthetic in nature and has no aect on the sight’s zero. Turn the horizontal and
vertical adjustments on the top or side of
the magnier by hand, with a coin or a
at head screwdriver to reposition reticle
to the desired position.
Switch operation:
To switch the magnier to the side,
simply push the optic to the right or le,
depending on how it is mounted. To close
the mount, push the magnier back into
its original position until a hard stop is
achieved.
ADJUSTABLE DIOPTER
e G33 optic includes an adjustable diopter that allows the user to customize
the focus to their particular vision. is feature ensures a crisp, clean aiming
dot for more precision and shot placement. To adjust, simply grasp the diopter
with the thumb and fore nger and turn either clockwise or counter-clockwise
until a clear sight picture is achieved.
M1957 Rev B
To Next Page
Need help?
General
