What to do if my ep ES20-WA Forklifts load can not be lifted?
If the load cannot be lifted, the charge capacity might be below 20/40%, so you should charge the battery. Also, the hydraulic oil level might be too low, so check the hydraulic oil level. It is also possible that the load is excessive, so note the maximum capacity as indicated on the data plate.
How to fix an ep Forklifts stacker that does not start?
If the stacker does not start, check the battery connector and connect it if necessary. Ensure the key switch is set to “I”. Check the battery charge and charge the battery if necessary. Also, test the fuses and interrupt charging.
Explains the information found on the stacker's data plate, including product name, model, serial number, and capacity.
Illustrates the relationship between load center and load weight for safe operation.
Outlines essential safety rules for operating the stacker, including driver authorization, duties, and hazardous area protocols.
Details the functions of various controls and display instruments on the stacker, such as Emergency Stop and Tiller.
Covers safety rules for travel, driving conduct, and visibility during stacker operation.
Explains how to travel, steer, and brake the stacker safely, including emergency stops and automatic braking.
Details the procedure for safely collecting and depositing loads, including lifting and lowering operations.
Provides guidance on identifying and rectifying common faults and operational issues.
Outlines safety precautions for handling, maintaining, and disposing of acid batteries.
Provides instructions for safely charging the stacker's battery, emphasizing ventilation and cable checks.
Explains the process for safely removing and installing batteries, including crane handling and connection checks.
Ensures servicing and inspection are performed safely, with emphasis on original parts and environmental protection.
Covers safety protocols for maintenance personnel, lifting, jacking, and cleaning the stacker.
Details the importance of regular servicing, inspection intervals, and customer-performed checks.
Details requirements for periodic safety inspections and checks following unusual incidents or damage.
General| Power Type | Electric |
|---|---|
| Rated Load | 2000 kg |
| Load Center | 500 mm |
| Wheel Type | Solid |
| Fork Length | 1070 mm |
| Battery Voltage | 48 V |
To Next Page
