What to do if my ep CQD20 Forklifts truck does not start?
If your EP Forklift won't start, there are several potential causes to investigate: * Ensure the battery connector is securely connected. * Verify the key switch is in the “I” position. * Check the battery charge level and charge if necessary. * Inspect the fuses. * Make sure the truck is not in charge mode; interrupt charging if it is.
What to do if my ep Forklifts load can not be lifted?
If the load cannot be lifted by your EP Forklifts, it might be due to: * Low hydraulic oil level. Check and replenish as needed. * Excessive load. Ensure the load does not exceed the maximum capacity specified on the data plate.
Details essential safety rules and guidelines for operating the reach truck safely.
Explains the functions and operation of the truck's control panel and display units.
Focuses on safe driving practices, load handling, and operational procedures.
Outlines critical safety precautions for handling and working with acid batteries.
Details safety rules and procedures for personnel performing maintenance tasks.
Explains the importance of regular servicing and provides inspection checklists and schedules.
General| Drive Type | Electric |
|---|---|
| Load Capacity | 2000 kg |
| Load Center Distance | 500 mm |
| Lifting Height | 3000 mm |
| Fork Length | 1070 mm |
| Overall Width | 1150 mm |
| Power Source | Battery |
| Battery Voltage | 48 V |
To Next Page
