The references to left and right are based on the
load handler as viewed from the operator’s position.
Push the control switch/lever (4) in direction (X).
Push the control switch/lever (4) in direction (Y).
3.5 Parking the truck securely
When you leave the truck it must be securely
parked even if you only intend to leave it for a
• Lower the load completely and position
• Retract the mast support fully.
• Set the emergency brake switch (2)
“
OFF
”
.
• Turn off the key switch and remove the key(1).
Warning!
Do not park the truck on a slope. The
load must always be lowered to the
ground.