CONTENTS
Section 1 General p.3
Section 2 Installation and instructions for usage p.4
Section 3 Connection alternatives measuring voltage p.6
and measuring current
Section 4 Display functions p.8
Section 5 Display of grid parameters p.9
Section 6 PROGRAM-MODE / Manual programming p.11
6.1 Programming lock p.18
6.2 QUICK-Program p.19
Section 7 Automatic initialization p.20
Section 8 Automatic test run p.21
Section 9 HELP-function / actual assignment of outputs p.21
Section 10 MANUAL OPERATION p.23
Section 11 SERVICE MENU / Error storage p.24
Section 12 EXPERT MODE
12.1 Expert-Mode 1 p.25
12.2 Expert-Mode 2 p.27
Section 13 Control principle p.28
Section 14 Interfaces p.29
14.1 ASCII -protocol p.30
14.2 Controller coupling p.30
14.3 Windows-software for PC p.31
Section 15 Alarm relay / Error messages p.32
Section 16 Display-editor p.32
Section 17 OSCI-MODE p.32
Section 18 Maintenance and warranty p.32
Appendixes/ Tables:
Annex 1 Troubleshooting p.33
Annex 2 Technical data p.35
Annex 3 Factory settings p.37
Annex 4 Control series table p.39
Control series editor
Annex 5 Register MODBUS protocol p.40
Annex 6 Operation diagram p.43
- 2 -
Rev.: 04.2013
To Next Page
Loading...