Safety and operating instructions
22 © Construction Tools GmbH | 33905146 01 | 2019-09-05
Original Instructions
4.1 Transport using a crane
n
Secure the hydraulic attachment with ropes or chains
as shown in the following illustration.
n
Slowly lift the hydraulic attachment.
n
Place the hydraulic attachment on timber support
blocks.
4.2 Transport using a forklift
truck
WARNING Hydraulic attachment tipping over
The hydraulic attachment tipping off the fork of the forklift
truck or the pallet may cause serious injury.
u Place the hydraulic attachment on a pallet.
u Strap the hydraulic attachment to the pallet using
suitable strapping, as shown in the illustration below.
u Move the fork of the forklift truck under the pallet so
that the centre of gravity is between the prongs.
n
Move the fork of the forklift truck under the pallet so
that the hydraulic attachment cannot tip over.
n
Slowly lift the pallet with the hydraulic attachment.
n
Transport the pallet with the hydraulic attachment to
the location provided for.
To Next Page
Loading...
