BIOS
Page 4-18
Power-On by Alarm
When enabled, you can set the date and time in the following two fields. Any event
occurring at the specified date or time awakens the system from power savings
mode.
4-6 PNP/PCI Configuration
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQs may cause the system to not find certain devices.
Figure 7: PNP/PCI Configuration Setup
Reset Configuration Data
This setting allows you to clear ESCD data. The default is Disabled
Disabled:Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can set
this field to Enabled in order to clear ESCD.
To Next Page
Loading...
