BIOS
Page 4-19
Resources Controlled By
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Cards resources are controlled manually. The IRQ Resources
field becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI/ISA PNP or Legacy ISA Cards.
Auto: If your ISA card and PCI cards are all PNP cards, BIOS assigns the
interrupt resource automatically.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some nonstandard
VGA cards. This board includes a built-in VGA system that does not require palette
snooping so you must leave this item disabled.
Options: Enabled, Disabled.
Interrupt requests are shared as shown below:
IMPORTANT!
If using PCI cards on shared slots, make sure that the drivers support Shared IRQ or that
the cards dont need IRQ assignments. Conflicts will arise between the two PCI groups that
will make the system unstable or cards inoperable.
ATNIBTNICTNIDTNI
tolSPGA
V
1tolS
V
2tolS
V
tolS3
V
tolS4
V
tolS5
V
6tolS
V
To Next Page
Loading...
