LUBRICATION AND GENERAL MAINTENANCE
THE FOLLOWING ROUTINE MAINTENANCE SHOULD BE CARRIED OUT TO
ENSURE YEARS OF TROUBLE FREE OPERATION.
EVERY 30 DAYS:
1. WASH AND WAX THE EXTERIOR SURFACE OF THE CABINET TO HELP MAINTAIN
THE POWDERCOAT SURFACE.
2. CHECK REBOUND SENSITIVITY AND ADJUST AS NECESSARY.
EVERY 60 DAYS:
1. CHECK AND TIGHTEN ALL NUTS, BOLTS, AND SCREWS THROUGHOUT THE GATE
OPERATOR.
2. CHECK THE UP AND DOWN LIMIT SWITCHES FOR ADJUSTMENT AND TIGHTNESS.
DO NOT MAKE ANY ADJUSTMENTS UNLESS THE GATE CIRCUIT BREAKER IS IN
THE OFF POSITION.
3. CHECK THE BELT TENSION AND PULLEYS FOR ALIGNMENT AND WEAR.
EVERY 12 MONTHS:
DRAIN AND REFILL THE SPEED REDUCER WITH SYNTHETIC GEAR OIL. (MOBIL
SHC634 OR EQUIVALENT). DO NOT OVERFILL.
To Next Page
Loading...