Epsolar LS0512 User Manual

19
4.3 Setting Operation
 Load Work Mode Setting
When the controller is powered on, press the setting button to control
the load output. Press the button once, the ON/OFF status will be
changed corresponding.
 Battery Type Setting
Press the setting button for more than 5 seconds, battery indicator
LED1, LED2, LED3 will be flashing correspondingly. Then press the
setting button to choose Sealed, Gel, and Flooded battery type. The
setting is finished till the digital tube stop flashing.
Battery type selection Table4-4
1
2
3
Battery type
○
×
×
Sealed lead acid battery
○
○
×
Gel battery
○
○
○
Flooded battery
“○”LED indicator on “×”LED indicator off

Epsolar LS0512 Specifications

General

Brand	Epsolar
Model	LS0512
Category	Network Router
Language	English