1 Important Safety Instructions
SAVE THESE INSTRUCTIONS:
This manual contains important safety, installation and operating
instructions for the Remote Meter.
General Safety Information
■
Please inspect the MT50 thoroughly after it is delivered. If any damage is
seen, please notify the shipping company or our company immediately. A
photo of the damage may be helpful.
■
Read all instructions and cautions in the manual before starting the
installation.
■
Keep the MT50 away from rain, exposure, severe dust, vibrations,corrosive
gas and intense electromagnetic interference.
■
Do not allow water to enter remote meter.
■
There are no user serviceable parts inside the controller. Do not
disassemble or attempt to repair it.
2 General Information
2.1 Features
The new-generation remote display unit MT50 for LSxxxxB
、
VSxxxxB and
TracerxxxxB controllers is an associated display device which supports both
1
书籍1.indb 1 2013-10-18 15:04:18
To Next Page
Loading...
