4
1 – Charging Status LED Indicator
An LED indicator that shows charging status and overvoltage of battery.
2 – Battery Status LED Indicator
An LED indicator that shows battery status or system errors.
3 – Temperature Sensor
Measure ambient temperature and make temperature compensation for charging and
discharging.
4 – Setting Indicators
Corresponding indicator will be on when set timer1, timer2 and battery type.
5 – LED Digital Display
Display the load work mode and status.
6 – Setting Button (in manual mode used for load ON/OFF)
Set load work mode and select battery type.
7 – Solar Module Terminals
Connect solar modules.
8 – Battery Terminals
Connect batteries.
9 – Load Terminals
Connect loads.
10 – RJ45 Communication Interface
Communicate with remote meter MT-5.
2.2 Optional Accessories
Remote Meter(Model：MT-5)
The digital remote meter displays system operating information, error indications,
and self-diagnostics read-out. Information is displayed on a backlit LCD display. The
large numerical display and icons are easy to read and large buttons make navigating
the meter menus easy. The meter can be flush mounted in a wall or surface mounted
using the mounting frame (included). The MT-5 is supplied with 2m of cable and a
mounting frame. The MT-5 connects to the RJ45 port on the Tracer.
To Next Page
Loading...
Need help?
General
