Smoothness Property
Smoothness Property
Applies To
Vision Objects: Geometric
Description
Sets / returns the smoothness level for the geometric edge extraction filter.
Usage
VGet Sequence.Object.Smoothness, var
VSet Sequence.Object.Smoothness, value
Sequence Name of a sequence or string variable containing a sequence name.
Object Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var Integer variable that will contain the value of the property.
value Integer expression for the new value of the property.
Values
0 - 100
Default: 50
Remarks
The Smoothness property allows you to control the smoothing level of the edge extraction filter. The
smoothing operation evens out rough edges and removes noise. The range of this control varies from 0 (no
smooth) to 100 (a very strong smooth). The default setting is 50.
The DetailLevel property also affects how edges are extracted.
See Also
DetailLevel Property, Object Tab, Timeout Property
160 Vision Guide 5.0 Reference (Ver.5.3) Rev.1
To Next Page
Loading...
