StartPntObjResult Property
StartPntObjResult Property
Applies To
Vision Objects: Edge, Line
Description
Specifies which result to use from the StartPointObject.
Usage
VGet Sequence.Object.StartPntObjResult, var
VSet Sequence.Object.StartPntObjResult, value
Sequence Name of a sequence or string variable containing a sequence name.
Object Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var Integer variable that will contain the value of the property.
value Integer expression for the new value of the property.
Values
The value can range from 1 to the NumberToFind value for the StartPointObject. If the StartPointObject is
'Screen', then the value is always 1.
Remarks
StartPntObjResult enables you to attach several objects to the results of one StartPointObject. For example,
you could create a blob object with NumberToFind set to 4. Then you could attach a line object to each
one of the results by specifying the blob for the StartPointObject of each line and a different
StartPntObjResult for each line.
See Also
Edge Object, EndPntObjResult Property, Line Object, Object Tab, StartPointObject Property
162 Vision Guide 5.0 Reference (Ver.5.3) Rev.1
To Next Page
Loading...
