Lamp Property
Lamp Property
Applies To
Vision Calibration
Description
Sets / returns the output bit used for the calibration lamp.
Usage
VGet Calibration.Lamp, var
VSet Calibration.Lamp, value
Calibration Name of a calibration or string variable containing a calibration name.
var Integer variable that will contain the value of the property.
value Integer expression for the new value of the property.
Values
Integer value of a valid standard output bit.
Remarks
Use the Lamp property to automatically turn on a lamp for calibration. Use the LampDelay property to
allow time for a lamp to turn on before calibration continues.
See Also
LampDelay Property, UpwardLamp Property
Vision Guide 5.0 Reference (Ver.5.3) Rev.1 61
To Next Page
Loading...
