EasyManua.ls Logo

Epson 670 - Page 11

Epson 670
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R4C474Setup Guide
Rev_C
A5 size SETUP.FM
3/24/00 Pass 0
R
Proof Sign-off:
Gazan, CRE Tsukada_______
N.Nomoto _______
_______
Note:
Install both ink cartridges. If either of the cartridges is not installed, the printer
will not work.
6. Press the ink cartridge clamps down until they lock in place.
c
Caution:
Once you install the ink cartridges, do not open their clamps again until
you replace the ink cartridges; otherwise, the cartridges may become
unusable.
7. Press the
R
cleaning button. The printer moves the print head and
begins charging the ink delivery system. This process takes about one
and a half minutes.
c
Caution:
Always press the
R
cleaning button to move the print head. Do not
move the print head by hand. Doing so may damage the printer.
While the ink is charging, the
P
power light flashes and the printer
produces a variety of mechanical sounds. These sounds are normal.
When the ink delivery system has been charged, the print head returns
to its home (far right) position and the
P
power light comes on.
c
Caution:
Never turn off the printer while the
P power light is flashing.
8. Close the printer cover.

Related product manuals