Clearing Jammed Paper (8/8)
EPSON AcuLaser C7000 Quick Reference
Note:
If paper is torn, be sure to remove all torn
pieces.
3. Push the main unit of the Duplex Unit’s
main unit back into the printer.
When the paper jam is cleared completely
and the Duplex Unit’s main unit (unit G) is
pushed back into the printer, the jammed
page’s print data is automatically reprinted.
Removing the main unit
If you cannot remove the jammed paper
using the previous procedures, remove the
Duplex Unit’s main unit.
Follow the instruction below to remove the
Duplex Unit’s main unit.
Push the main unit slightly backward, then
remove the main unit by pulling it toward
you while pushing down both levers.
To Previous Page
Loading...
