Epson AcuLaser CX37DN Series - Page 109

1
3
1
2
1
If “Short Edge (Bottom)” is selected, the pages will be laid out to flip at the bottom.
1
1
1
1
2
3
If “Long Edge (Left)” is selected, the pages will be laid out to flip at the side.
1
1
1
1
2
3
If “Long Edge (Right)” is selected, the pages will be laid out to flip at the right.
In addition, if “Print Type” has been set to “Booklet”, autoduplex printing is performed.
The following Order settings are available when “Booklet” is selected.
1
1
2
3
If “Left Binding” is selected, the pages can be folded as a left-bound booklet.
3
3
1
1
2
If “Right Binding” is selected, the pages can be folded as a right-bound booklet.
1. Load plain paper into the tray.
2. From the printer driver, specify duplex (double-sided) printing (Layout tab in Windows).
3. Click OK.
Note:
With autoduplexing, the back side is printed first, and then the front side is printed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Media Handling 109