Epson AcuLaser CX37DN Series - Machine Setting Menu

CAUTION
*1
LOW
CAUTION 1
Settings
OFF / LOW / MIDDLE / HIGH
Select whether sounds are produced when a message appears in
the message window, warning that it is almost time to replace
consumables or a replaceable part.
LOW
CAUTION 2
Settings
OFF / LOW / MIDDLE / HIGH
Select whether sounds are produced when the user performs an
incorrect operation.
LOW
CAUTION 3
Settings
OFF / LOW / MIDDLE / HIGH
Select whether sounds are produced when an error occurs that
can be corrected by the user by referring to the message that
appeared or the User’s Guide.
HIGH
CAUTION
Settings
OFF / LOW / MIDDLE / HIGH
Select whether sounds are produced when an error occurs that
cannot be corrected by the user or requires a service represen‐
tative.
LCD CONTRAST Settings (LIGHT)
(DARK)
Specify the brightness of the message window.
KEY SPEED TIME TO START Settings
0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec /
2.0sec / 2.5sec / 3.0sec
Specify the length of time until the cursor begins to move con‐
tinuously when a key is held down.
INTERVAL Settings
0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec /
2.0sec / 2.5sec / 3.0sec
Specify the length of time until the cursor continuously moves
between settings or characters.
*1
This menu item appears when ACCESSIBILITY/SOUND SETTING is set to ENABLE.
MACHINE SETTING Menu
Note:
Manufacturer’s default settings appear in bold.
AUTO PANEL RESET (Epson AcuLaser
CX37DNF only)
Settings
OFF / 30sec / 1min / 2min / 3min / 4min / 5min
Specify the length of time until all settings that have not been pro‐
grammed, such as the number of copies, are cleared and return to their
default settings when no operation is performed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 50