Epson AcuLaser CX37DN Series - Page 55

BOOTP
*1
Settings
DISABLE / ENABLE
If there is a BOOTP server on the network, specify
whether the IP address and other network information
is automatically assigned by the BOOTP server.
ARP/PING
*1
Settings
DISABLE / ENABLE
Select whether or not the ARP/PING command is used
when the IP address is assigned.
HTTP
*1
Settings
DISABLE / ENABLE
Select whether or not to enable HTTP.
FTP SERVER
*1
Settings
DISABLE / ENABLE
Select whether or not to enable the FTP server.
FTP TX
*1
Settings
DISABLE / ENABLE
Select whether or not to enable the FTP client.
SMB
*1
Settings
DISABLE / ENABLE
Select whether or not to enable SMB.
BONJOUR
*1
Settings
DISABLE / ENABLE
Select whether or not to enable Bonjour.
DYNAMIC DNS
*1
Settings
DISABLE / ENABLE
Select whether or not to enable Dynamic DNS.
IPP
*1
Settings
DISABLE / ENABLE
Select whether or not to enable IPP.
Note:
If HTTP is set to DISABLE, IPP cannot be set.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 55